ANESA-L/2007, ANESA-L/2007w

ANESA-L/2007, ANESA-L/2007w

Models ANESA-L/2007 and ANESA-L/2007w are performed in rigid plastic case.

 

Complete set of this model includes:

- Analyzer ANESA
- a cable set with 5 microprocessors
- Protection Key Guardant Stealth II
- USB cable
- case

Dimensions: 160х100х45 mm Weight: 0,35 kg (including cable)

ANESA-L/2007 – requires software USPIH, version 10

ANESA-L/2007w - requires software USPIH, version 9

 

The main differences between the software USPIH 9 and USPIH 10

 

General technical data for all models of ANESA are the following:

 

PC mains voltage                                            

230 V ± 10 %; 50/60 Hz

Analyzer’s mains voltage (from USB port)

U = 5 ± 1 V DC

I = 195 mA

Consumption

max. 0,975 VA

MD Class

II

Protection of patient

A

EMC

in accordance with

EN 60601-1-2:2007/AC:2010

IP Class of Analyzer

IP 20

Readiness time counted from
switching on

max. 3 min

Range of temperature of reference points

24 – 42 °C

Margin of error of reference points

max. ± 0,75 °C

Length of cables for sensors

min. 1,5 m

Accuracy of the sensors

±0,5 °C,  from -10 °C to +85 °C

Resolution of the sensors

0.0625°C

Resolution is user-configurable to 12 bits

Time of examination

max.730 sec

Method of diagnostic:                  

Malykhin-Pulavskyi (data collection from reference point)

Software

USPIH (based on methodology of Malykhin-Pulavskyi)

 

 

Minimum hardware requirements:

Processor

Pentium 4, and higher

RAM                     

min. 512 Mb

HDD                     

40 GB

Display                 

min. SVGA 14”…17” definition 1024x768 pixels

USB port

min. 3

 

 

Minimum software requirements:

Operating system

Windows XP, 2003, 2008, Vista, 7

During installation of software USPIH, a user must have administrator rights of access.

Antivirus software

Any antivirus software must be set up in such a way, when the software USPIH isn’t blocked.

 

Coach...

Complete blood cell formula in 6 minutes, no blood sample required.